Adjust key backlighting manually:
1) Press the MENU Key on the PFD to display the PFD Setup Menu Window. 'AUTO' becomes highlighted to the
right of 'PFD DSPL'.
2) Turn the large FMS Knob to highlight 'PFD DSPL'. Turn the small FMS Knob in the direction of the green
arrowhead to display 'PFD KEY'.
3) Turn the large FMS Knob to highlight 'AUTO' and turn the small FMS Knob to display the selection box.
4) Turn the FMS Knob to select 'MANUAL', then press the ENT Key. The intensity value becomes highlighted.
5) Turn the small FMS Knob to select the desired backlighting, then press the ENT Key.
6) Turn the large FMS Knob to highlight 'MFD DSPL' and turn the small FMS Knob in the direction of the green
arrowhead to display 'MFD KEY'.
7) Repeat steps 3 to 5.
8) Press the CLR or MENU Key to remove the PFD Setup Menu Window from the display.
190-00498-01 Rev. A
Figure 1-36 Manual Key Lighting Adjustment
Garmin G1000 Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
1-45