Table of Contents
Advertisement
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord (mains lead) in the order (1~3)
shown below. Be sure to connect the power cord (mains lead) last.
to LINE OUT
L/R (AUDIO)1
or 2
R
1
2
DIGITAL OUT
LINE OUT
COAXIAL
OPTICAL
AUDIO
PCM/DTS/MPEG
R
L
DOLBY DIGITAL
1
2
l : Signal flow
When connecting to a standard 4:3 screen
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 66.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold [/1 down for
a few seconds while pressing X on the player.
16
1
Audio/video
cord (supplied)
to LINE OUT
(VIDEO)1 or 2
LINE OUT
AUDIO
VIDEO
L
S VIDEO
COMPONENT
OUT
VIDEO OUT
VIDEO
Y
C
B
C
R
to video input
to audio input
CD/DVD Player
3
Power source
z Hints
• To check the current setting of the player's colour
system, press [/1 on the player or remote. The
power indicator lights up in green. When "NTSC"
appears on the front panel display, the colour
system of the player is set to NTSC. When
"NTSC" does not appear, the colour system is set
to PAL.
• When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jacks on the player to
the TV's video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV's audio
input jack.
TV
INPUT
(yellow)
VIDEO
(white)
L
AUDIO
(red)
R
2
Power source
Advertisement
Table of Contents
