Sony DVP-K370 Operating Instructions Manual page 63

Controlling the volume of your
AV amplifier (receiver) with the
remote
Number
buttons
1
Hold down [/1, and enter your AV
amplifier (receiver)'s manufacturer's
code (see the table below) using the
number buttons.
2
Release [/1.
You can control the volume of the AV
amplifier (receiver) using VOL +/–.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer Code number
Sony 80, 88, 89, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
If you would rather control the volume of
your TV
Repeat Steps 1 and 2 above and enter the code
number 90 (default).
[/1
VOL +/–
63