Playing Discs - Sony DVP-K370 Operating Instructions Manual

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Power
indicator
[/1
Z
AUDIO
H
1
Turn on your TV.
2
Press [/1.
The player turns on and the power
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
28
4
5
A
H
[/1
To turn off the player
Press [/1. The player enters standby mode.
z Hint
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power off function).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
• Set the sound to "STEREO" using the
• Do not play DTS sound tracks without first
Press A on the player, and place a
disc on the disc tray.
With the playback side facing down
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 32.
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
AUDIO button when you play DTS sound
tracks on a CD (page 50).
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if "DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 70),
and may affect your ears or cause your
speakers to be damaged.