Step 3: Tv Hookups; Step 4: Playing A Disc; Hookups; Hooking Up The Player - Sony DVP-K370 Service Manual

QQ
3 7 63 1515 0

Step 3: TV Hookups

Connect the supplied audio/video cord and the power cord (mains lead) in the order (1~3)
shown below. Be sure to connect the power cord (mains lead) last.
1
Audio/video
cord (supplied)
to LINE OUT to LINE OUT
L/R (AUDIO)1 (VIDEO)1 or 2
or 2
LINE OUT
AUDIO VIDEO
R L
1
2
CD/DVD Player
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/MPEG R L
DOLBY DIGITAL
1 C
B
2 C
R
l : Signal flow
When connecting to a standard 4:3 screen
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 66.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold [/1 down for
a few seconds while pressing X on the player.
TE
L 13942296513
16

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords (mains leads), check that you have all of the
supplied accessories, and insert the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
A
(yellow)
INPUT
Audio/video
VIDEO
cord (supplied)
L
AUDIO
R
TV, projector or AV
amplifier (receiver)
(yellow)
to LINE OUT (VIDEO)1 or 2
DIGITAL OUT LINE OUT S VIDEO COMPONENT
OUT VIDEO OUT
COAXIAL OPTICAL AUDIO VIDEO Y
PCM/DTS/MPEG R L
DOLBY DIGITAL
1 C
B
2
C R
www
to S VIDEO OUT
.
l : Signal flow
18
http://www.xiaoyu163.com
TV
to video input
INPUT
(yellow)
VIDEO
(white)
L
AUDIO
(red)
R
to audio input
2
Power source
3
Power source
z Hints
• To check the current setting of the player's colour
system, press [/1 on the player or remote. The
power indicator lights up in green. When " NTSC"
appears on the front panel display, the colour
system of the player is set to NTSC. When
" NTSC" does not appear, the colour system is set
to PAL.
• When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jacks on the player to
the TV's video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV's audio
input jack.
C
Component
COMPONENT
VIDEO IN
video cord
(not supplied) Y
(green)
C
B
(blue)
C
R
(red)
TV, projector or AV
amplifier (receiver)
(green) (blue) (red)
to COMPONENT
VIDEO OUT
CD/DVD player
INPUT
x ao
y
S VIDEO
i
S VIDEO cord TV, projector or AV
B
(not supplied) amplifier (receiver)
http://www.xiaoyu163.com
8

Step 4: Playing a Disc

With the playback side facing down
A Turn on the TV.
B Press [/1 on the player.
C Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
D Press A on the player to open the
disc tray.
E Place the disc on the tray with the
playback side facing down.
F Press H.
The disc tray closes and the player begins
playing the disc.
Q Q
3 6 7 1 3
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, C
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
Green
Blue
Red
Notes
• You can switch the player's colour system to match the colour system of the connected TV (page 16).
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen. If your TV only has one audio/video input jack, connect the player to this jack.
CD/DVD player
u163
.
1-4
2 9 9 4 2 8
After Step 6
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 32) or VIDEO CD disc (page 32).
To stop playing
Press x.
To remove the disc
Press A.
To turn off the player
Press [/1. The player enters standby mode
and the power indicator lights up in red.
1 5 0 5 8 2 9 9 4
Yellow (Video)
White (L)
Red (R)
, C )
B R
Green
Blue
Red
VCR
TV
Connect
m
directly
co
9 9
2 8 9 9
17
19