Table of Contents
Advertisement
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD.
Depending on the DVD, the number of the
recorded channels may differ.
1 2 ( 2 7 )
1 8 ( 3 4 )
T
1 : 3 2 : 5 5
1: ENGLISH
Currently playing program format**
*"PCM," "MPEG," "DTS," or "DOLBY
DIGITAL" is displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2+
Center component 1
**The letters in the programme format
display mean the following sound
component:
L:
Front (left)
R:
Front (right)
C:
Centre
LS: Rear (left)
RS: Rear (right)
S:
Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
For Dolby Digital 5.1 ch and DTS, "LFE" is always
enclosed in a solid line regardless of the LFE signal
component being output.
Note
If "DTS" is set to "OFF" in "AUDIO SETUP"
(page 70), the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
Current audio format*
PLAY
DVD VIDEO
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
C
R
LFE
LS
RS
Rear component 2
LFE (Low Frequency
Effect) component 1
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC
2
Press SUR repeatedly to select
one of the TVS sounds.
Refer to the following explanations given
for each item.
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
SUR
51
,continued
Advertisement
Table of Contents
