Table of Contents
Advertisement
User's Guide
❏ Setting up using the software disc (only for the models that come with a software disc and users with computers
with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Set up Scanner connection again (for new network router or changing USB to network, etc.) on the
Install Software screen, and then click Next. Follow the on-screen instructions.
Disabling the Network Setting from the Control Panel
You can disable the network settings.
1. Press the
button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
The
light and
Note:
Press the
button to re-connect Wi-Fi and AP mode.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Turn the scanner off.
Network Settings
light turn off when these are disabled.
100
Advertisement
Table of Contents
