ABB TTH300 Series Operating Instruction page 37
Head-mount temperature transmitter
Hide thumbs
Also See for TTH300 Series:
- Operating instruction (76 pages) ,
- Instructions manual (26 pages) ,
- Safety instructions (24 pages)
Table of Contents
Advertisement
TTH300 HEAD-MOUNT TEMPERATURE TRANSMITTER | OI/TTH300-EN REV. E
Parameter name
12.3456 [unit]
Next
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by entering
the individual decimal positions.
Menu name
Parameter name
Currently set value
Next
1. Select the parameters you want to set in the menu.
2. Use
to call up the parameter for editing. The decimal
place that is currently selected is highlighted.
Parameter name
ABC.........
ABCDEFGHIJKLMOPQ
Next
3. Use
to select the decimal place to change.
4. Use
/
to set the desired value.
5. Use
to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use
to confirm your setting.
This concludes the procedure for changing a parameter value.
Change from two to one column
OK
Edit
OK
37
Advertisement
Table of Contents
