5. Set the time period you wish motion detection to take place. Left click the 'Set' button next to the 'Period'
heading (image A).
6. The system will default to 24/7. Select the day and time period you want the system to have motion
detection enabled by left clicking.
7. Right click to return to the previous menu.
RECORD CHANNEL: Set the DVR to record a number of channels/cameras even if only 1 is activated (e.g. by
motion). If camera 1 is triggered then all cameras will start recording for maximum coverage.
TOUR: Same as above but the DVR will record while rotating between all the channels/cameras on screen.
SHOW MESSAGE: Enables a notification to pop up on your screen to indicate that an event has taken place.
BUZZER: This will activate a buzzer sound on the DVR to indicate that an event has taken place.
SEND MAIL: Currently not supported.
FTP UPLOAD: Currently not supported.
13