Advertisement
smart
Living
Installation · Programming · Operating
Keep this manual safe for reference and future maintenance
Thank you for choosing the Yale Smart Home Alarm
System. This simple to install system has been designed
with the user in mind.
All the components are self contained and no wired
connections are needed between the units. There is no
need to damage the home decor, lift carpets or run cables.
You can install up to 20 devices (Max. 6 PIR Image / Video
Cameras) in this system. As well as extra Door/Window
Contacts, PIR Motion Detectors and Smoke Detectors,
you can add Key Fob remote controls for added control
convenience.
Regular testing and battery changes (when notified by the
system) will ensure reliability and peace of mind.
There is no need to wire into the mains supply or seek
the services of a qualified electrician. The Smart Hub is
powered by an adaptor and all other components are
powered by battery (all batteries included).
All accessories are 'tamper' protected. Any unauthorised
tampering with these items when the system is armed will
result in the alarm being triggered.
For more information on this product and Yale Smart
Living Range visit www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
Smart Home
Alarm Kits
Contents
Recommended Installation Sequence
We recommend you follow the simple install
sequence, headings numbered 1-5.
The 2 year guarantee for this Yale Smart
Home Alarm Kit is active from the date
2
of purchase (A copy of this guarantee is
available on our website).
Please register online within
12 months of purchase at
www.yale.co.uk/registeryourproduct
Information and illustrations are subject to change within this
document. Yale reserves the right to alter the specification and
product design at anytime without notice. Yale® is a registered
trademark. © 2016 ASSA ABLOY. All rights reserved.
2
4
5
6
8
10
12
13
15
17
19
Issue No: 1A
Advertisement
Table of Contents
Related Manuals for Yale YL-SR-320
Summary of Contents for Yale YL-SR-320
-
Page 1: Table Of Contents
12 months of purchase at www.yale.co.uk/registeryourproduct Information and illustrations are subject to change within this document. Yale reserves the right to alter the specification and product design at anytime without notice. Yale® is a registered trademark. © 2016 ASSA ABLOY. All rights reserved. -
Page 2: Location Planning
Location Planning Work out the best places to locate the devices for maximum protection. Having chosen the locations do not mount at this stage. Key Pad Home and Away Mode Planning When used as a secondary Key Pad, it is ideal for use in bedrooms or at the top of a stairwell so the ground floor can be armed when going to bed for The Home Arming mode allows the premises to be part... - Page 3 Smoke Detector External Siren • Mount in the middle of the ceiling at the top of a Choose a position on an external wall where the stairwell, or on the centre of hallway ceilings where siren would be most prominent. Mount as high as smoke would most likely be detected.
-
Page 4: Unpack All The Parts
Unpack all the parts Smart Hub 2.0 Key Pad EF-KP 1. Unpack the kit content on a table. Remove the mounting 1. Pull out the plastic battery saver tab at the back of the plate (if fitted) from the Smart Hub by sliding plate Key Pad. - Page 5 Additional Accessories External Siren EF-BX Keyfob EF-KF (SR-320, 330 & 340 kits) (Sold Separately) 1. Open the battery compartment using a coin by turning cover in the direction of the big arrow so the small arrow is next to round dot. 2.
-
Page 6: Initial Set-Up
Compatibility: iOS 9, Android 4.2+ Internet Connection: Required on Smartphone First time registration Start The Yale Home System App on your phone. *Due to continuous improvement, please note that the graphic may differ from shown. Panel MAC / Serial Number:... - Page 7 Adding Accessories (if you purchased extra accessories) All accessories in the kit are linked to the Smart Hub. If you purchased extra accessories (or for some reason the accessories are deleted), please do the following: ress and hold the learn button on 1.
-
Page 8: Mounting Devices
Smart Hub will receive the system radio transmissions by doing a simple radio range test. Login to your Yale Home System App. Select “Controller”, “Device List” then select “Walk Test”. 3. Fit wall plugs and secure the PIR base with the screws provided. - Page 9 Mounting the Door/Window Contact Mounting the External Siren Ensure the tamper spring is fully compressed when the siren is mounted. If there is a gap, pack with a suitable spacing material. Note:The Door/Window Contact and magnet can be changed round as long as there is no more than a 10mm gap.
-
Page 10: Using The System
Home Arm Mode, allowing you time to disarm the alarm when coming home, please select the mode: Home Access. Arming and Disarming your Alarm Using the Yale Home System App... - Page 11 Pad. images/videos. Disarm Note: Up to 50 images/videos can be kept in the Yale Press the disarm key on the keyfob or press the disarm key Server (the oldest images/videos are automatically followed by a PIN on the Key Pad.
-
Page 12: About Your Alarm System
About your Alarm System (Default Settings) All accessories (except SR-PC To change the behavior mode on accessories, please see APP – “Controller” -> “Device List” -> and SR-PVC) are pre-set to choose each device to change . “entry” mode. • Burglar - Instant Alarm upon activation in both Away and Home Mode •... -
Page 13: Using Accessories
Using Accessories To provide additional flexibility and protection you can add extra Key Fobs, Key Pads, Panic Buttons and Smoke Detectors. These are available separately from your local stockist. Adding Accessories to your System Key Pad (See page 7) Key Pad Initialisation If you purchase a Key Pad as an extra Key Pad, you will need to initialise it prior to use with the Smart Hub. - Page 14 Using Accessories (cont.) Reset Key Pad code Testing • Smoke Detector testing should be done on a regular monthly basis. Pressing the test button will make the LED If the Key Pad code is accidentally forgotten, the Key Pad flash, the audible sounder chime and will send a radio can be reset to factory default (0000) using the following test signal to the Smart Hub when the button is released.
-
Page 15: Changing The Batteries
Changing the Batteries Always use correct type of batteries as replacements because any other battery can cause problems with the operation of the system. Ensure the correct steps are taken when changing batteries in tamper protected devices. Low Battery Indication PIR Motion Detector &... - Page 16 Changing the Batteries (cont.) Key Fob Battery Change Panic Button Battery Change When the battery is low the LED will glow dimly when any When the battery is low the LED will glow dimly when the key is pressed. The battery is changed as follows: button is pressed.
-
Page 17: Troubleshooting
Troubleshooting External Siren Door/Window Contact Siren produces a 3 second alarm when disarmed Door/Window Contact LED lights up • There has been a previous alarm and there might be an intruder still in the premises. • Batteries are low or the tamper switch has been disturbed. Check that the tamper switch spring is making contact with Siren produces a series of audible pips when the mounting surface. - Page 18 Top LED not lit up = No link to the Server/Internet Middle LED Yellow = System has Fault. Further detail will be found in the Yale App Middle LED not lit = OK Bottom LED solid red = System Armed...
-
Page 19: Specifications
PIR Motion Detector The phone feature and remote notifications require our central server. Yale does not guarantee limitless Alarm processing Microprocessor controlled dual and future availability of our free server. We would edge sequential pulse count with pulse length... - Page 20 Date: 03/03/2016 On behalf of ASSA ABLOY Ltd. NoPb Issue No: 1A WEEE THE YALE BRAND, with its unparalleled global reach and Note: Waste electrical products range of products, reassures more people in more countries and batteries should not be than any other consumer locking solution.