9 Troubleshooting
3. Are there duplicate IP addresses on the network?
a. Verify IP addresses (accessible nodes, edit Ethernet nodes, etc.)
4. Did you parameterize the Generic Ethernet Module in RSLogix 5000 correctly?
Figure 9-3
a. Do you have the "Comm. Format" set to Data –INT, or accidentally set
b. Do the Connection Parameters (addresses and length) match the drive
5. Could it be a bad Ethernet cable?
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076,
V4.0,
to Data-DINT?
Figure 9-4
telegram?
Figure 9-5
09/2018
38