Siemens SINAMICS G120 Manual page 35

8 Drive Parameter Access
Make sure the data type of the tag
(source/destination) matches the
data type of the parameter.
INT = 2 Bytes (16 bit)
REAL = 4 Bytes (32 bit)
To figure out the data type of the
parameter, search for the parameter
in the Starter help tool, or refer to the
List Manual.
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076, V4.0, 09/2018
35