Siemens SINAMICS G120 Manual page 20

5 Drive Configuration
Figure 5-3 Set IP Address for the G120 as shown
Figure 5-4 Bring the Drive Unit into Project. Choose Select and then Accept.
Figure 5-5 The G120 controller is now in the Project Tree. Go online to upload Power
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076, V4.0,
Module properties.
09/2018
20