Advertisement
4. HYDRAULIC SAFETY CUTTING HEADS WITH BLADE TRAVEL SENSOR
WARNING LABELS
IMPORTANT Before using
the equipment, carefully
read all the warnings and
instructions in this manual.
Failure to follow the war-
nings and instructions may
result in electric shock,
fire and/or serious injury.
Max. cutting cable diameter
Max. operating pressure
Oil necessary (displacement)
Wireless sensor frequency
Weight
Dimensions
- Hydraulic cutting heads type -RC2 are fitted with a unique wireless blade travel sensor paired
to the receiver integrated in the pump.
- Each cutting head is uniquely paired to its specific pump using USA frequencies (915 MHz).
- The wireless sensor mounted on the head is maintenance-free as it is fully protected and has
battery-free technology.
- Select the appropriate cutting head for the diameter of the cable to be cut and use only with
the associated paired pump.
- The cutting heads must be positioned manually around the cable to be cut, they are fitted with
eyelets to hang the head for better support during operation.
- A grounding point is provided to facilitate grounding of the cutting head when required.
Cutting head description (Ref. to Fig. 3):
1 - MALE INSULATED QUICK COUPLER
2 - EYELETS FOR HANGING THE SUPPORT STRAP
3 - HANDLE (TC085..to be attached)
4 - HEAD LATCH
15
Do not cut Steel.
Keep hands clear
of cutting bla-
Do not attempt to cut
Steel ropes or Steel rein-
des.
forced cables (ACSR),
the heads are designed
for cutting Copper or
Aluminum cable.
TC085Y-KV-RC2 TC096Y-KV-RC2 TC120Y-KV-RC2
3-3/8" (85)
inch (mm)
psi (bar)
5.5 (90)
cu. in. (cm
)
3
Mhz
13.4 (6.1)
lbs (kg)
inch
16.1 x 5.9 x 9.2
(410 x 152x 233)
(mm)
Always wear safety
gloves when ope-
rating these safety
cutting heads.
3-3/4" (95)
10,000 (700)
7.6 (124)
915
21 (9.6)
19.7 x 9.5 x 5.7
(500 x 242 x 145)
5 - BLADE
6 - GROUNDING SOCKET + KNOB
7 - CASE FOR WIRELESS BLADE SENSOR
8 - HEAD FIXING PIN
4-3/4" (120)
11.1 (182)
23.7 (10.8)
21.1 x 7.2 x 5.5
(536 x 184 x 139)
Advertisement
