Advertisement
60
With the battery inserted in the pump, the remaining battery
life can also be checked on the display, via touch button
selection (Ref. to section 7).
59
The display alongside indicates that the battery is low and the
pump will not start (Ref. to section 7.5).
58
The approximate time to fully recharge a CB1870L battery is about 150 minutes.
.........
— (E) Shoulder Strap: allows for easy transportation of the pump when connected to the rings
01
(2) on the pump.
It can also be used to secure the pump to the ladder in the manhole or to the manhole guard.
— (F) Radio Remote Control RRC1: allows users to control the pump from a safe distance.
(Ref. to section 2 for further details).
— (G) Portable hydraulic high capacity pump: driven by an 18 V battery powered electric motor.
An Electronic Pressure Sensor (EPS) ensures precision and repeatability of the work cycles and
a maximum pressure valve to ensure maximum operator safety.
RC OFF
The pump features a double safety control: hydraulic pressure and blade travel sensor signal.
The memory card integrated into the pump allows the storage of the data relating to previous
operating cycles.
The default settings of the pump are:
Operating mode: CUTTING (Ref. to section 7.2 to choose CRIMPING operating mode).
Oil release mode: SMART (Ref. to section 7.3 for further details).
Pump control mode: RADIO ON, enables the radio remote control (Ref. to section 7.4 for
further details).
Main components (Ref. to Fig. 2):
1 - OIL FIL LER CAP: for accessing the pump's oil tank.
2 - STRAP FASTENING RING: to attach the shoulder strap and transport the pump.
It can be used to hang the radio control before the storage of the pump.
3 - BATTERY RELEASE DEVICE: to lock/unlock the battery, press the button (3) and push the battery
downward to unlock it (Ref. to Fig. 6). Insert a battery from the bottom by sliding it into the
side guides until it locks.
4 - LED INDICATOR: to visually indicate to the operator the progress and the conclusion of the
cutting operation or to notify the operator of procedural or operational errors.
5 - BUZZER: synchronized with the LED indicator to indicate audibly the operation in pro-
gress or to notify the operator of procedural or operational errors.
6 - RADIO RECEIVER BOX: includes the radio receivers of the remote control and of the blade
travel sensor.
11
P
= 729 bar
n
P =
0 bar
P
= 729 bar
n
P
= 731 bar
p
P
P
= 729 bar
n
n
P =
0 bar
P =
P
= 729 bar
n
OK
P
P
= 10573 psi
n
n
P =
0 psi
P
p
OK
P
= 729 bar
P
SAVE 60%
n
n
OK
P =
.... bar
P = 0 bar
100
P
LED
ON
P
60
P =
P
59
n
P
p
58
P
.........
01
LED
ON
LED
= 729 bar
ON
0 bar
LED
OFF
= 729 bar
= 731 bar
= 729 bar
OK
= 325 bar
p
LED
OFF
= 729 bar
n
0 bar
= 729 bar
= 731 bar
= 729 bar
n
OK
OK
SAVE 60%
100
LED
OFF
max.
min.
BATTERY
BATTERY
BATTERY
BEEP
BATTERY
30001
RESET
SW:S1J41405
BEEP
90°
max 90°
max.
BATTERY
LED
ON
LED
OFF
BEEP
LED
OFF
LED
ON
min
BATTER
BEEP
Advertisement
