Advertisement
2. RRC1 RADIO REMOTE CONTROL
FEATURES:
frequency band:
battery:
dimensions:
weight:
IP code:
Operating temperature: -4 to +130 °F (-20 to +55 °C )
The RRC1 radio remote control allows users to control the pump.
Each RRC1 radio remote control is only paired to and should only be
used with the pump which it was supplied with. It is particularly suit-
able to utility cable cutting operations in limited access locations, eg.
in manholes, to enable working from a safe distance. Ergonomically
designed with a comfortable grip even while wearing work gloves.
The functions listed below are operable via the RRC1:
— Function:
1 - ON/OFF BUTTON: to switch on or off the
radio remote control. The radio remote control
automatically switches off after 3 minutes of
inactivity.
2 - PUMP BUTTON: to start the pump motor
or to reset any alarms when pressed and
held for 2 seconds.
3 - RELEASE BUTTON: can be operated at
any time (other than if there is an error)
to release the pressure allowing oil to be
returned to the pump reservoir.
4 - INDICATOR LED: t he center LED flashes
when the radio control is ON (green when
the remote control battery is good, red
when the remote control battery is low).
5 - HOOK: to hang the radio control to the rings (2)
of the pump or to the operator's belt during transportation or storage.
6 - CLIP: to hang the radio control to the operator's belt.
7 - POWER SWITCH: l ocated on the back of the radio control, this switch stops the power supply
from the batteries. When in the off position (O), the radio control cannot be started.
When the radio remote control is transported by airplane, the on/off switch must be in the off
position. The switch should not be used as an on/off button for the radio control .
13
2405–2480 MHz
2 x 1.5V AAA / LR03 Alkaline
2.6 x 4.5 x 1.5 in (66 x 114 x 37.5 mm)
0.3 lbs (140 g)
67
1
2
5
4
3
6
ON/OFF
ON/OFF
PUMP
RELEASE
RRC1
RADIO REMOTE CONTROL
7
FRONT
ON/OFF
PUMP
RELEASE
RRC1
RADIO REMOTE CONTROL
BACK
+
-
-
+
Advertisement
