Advertisement
7 - MECHANICAL PRESSURE RELEASE BUTTON: if required, by
pressing hard on the mechanical pressure release button,
the oil can be returned to the reservoir at any time, regard-
less of the status of the battery.
8 - I38F AUTOMATIC QUICK COUPLER: enables connection of
the insulated flexible hose. In order to attach or disconnect
the hose, pull the ring back.
The couplers cannot be disconnected if the system is under pressure.
The anti-dust protection cap must be used on both the hose and pump couplings to prevent
ingress of dirt or contamination.
9 - CAPACITIVE TOUCH BUTTON: for menu selection allows selection of various screens only when
the display is on (Ref. to section 7).
Do not apply pressure to or stab at the touch button, a light touch using a bare finger
is sufficient. The command pulse is sent when the finger releases the button.
The capacitive touch button may not work if touched using objects or when wearing
gloves, therefore always operate it using a bare finger.
10 - OLED DISPLAY: switches on when the control button (11) on the pump is pressed forward
and off automatically after 1 hour of non-operation.
11 - CONTROL BUTTON: rocker type, push forward once to wake
up the pump and turn on the display.
NOTE: if required the control button can be used to activate
the pump motor or release the oil in manual mode instead
of the RRC1 radio remote control.
By default setting this function is disabled, to enable refer
to section 7.4.
12 - HANDLE: for safe and balanced transportation of the pump.
7
11
12
Advertisement
