Advertisement
1.1) Compliance of use
- The B68M-P18A-KV-RC2 pump is designed to activate hydraulic heads for cutting conductor
cables or for crimping electrical cable lugs.
- The pump, when used with specifically designed cutting heads, allow for the safe cutting of
Copper and Aluminum cable where the absence of voltage cannot be guaranteed.
- The dielectric oil used within the pump has special properties which insulate the pump from
the cutting head in the event that a live cable is accidentally cut.
- The innovative radio remote control is designed specifically for use within manholes allowing
the operator to control and operate the pump outside of the manhole at a safe distance away
from the cutting operation.
- The complete unit (pump & cutting head) is fitted with a unique patented system which stops
the pumps operation when a sensor on the cutting head signals that the cutting blades have
fully travelled.
At this point the LED indicator and buzzer on the pump notify the operator of the successful
completion of the cutting operation. For this reason, each pump is paired to its specific cutting
head only and it must be considered as a complete unit.
For the proper operation of all the safety features in the complete unit, each cutting
head is paired to its associated pump. This procedure is completed by Cembre prior
to delivery. Due to this, the use of non-paired pumps and cutting heads is not recom-
mended and should be avoided. In order to trace all of the components of each complete unit,
such as: pump, cutting heads, radio control, the user should check the identification number
reported on the tag attached to each item.
1.2) Description
B68M-P18A-KV-RC2 includes the following (Ref. to Fig. 1):
— (A) Canvas bag: made from sturdy fabric, allows users to store the pump and accessories.
— (B) Battery charger: for recharging the batteries supplied; has "AIR COOLED" charging technol-
ogy and a processor for managing charging cycles.
To use, carefully follow the instructions in the battery charger user manual.
— (C) USB cable: for transferring the data stored on the internal memory card to a PC.
— (D) Rechargeable battery (2 pcs): 18 V - 7.0 Ah high capacity Lithium Ion battery.
Provides 100% of its energy between +5 and +122 °F (-15 and +50 °C).
Electronic control of the individual cells to prevent over-charging and under-discharging.
Greater longevity and ventilated recharging in short times thanks to AIR COOLED technology.
Timed automatic power off to optimize energy consumption.
Equipped with LED indicators that indicate the remaining battery life at any time by pressing
the button (P) (Ref. to Fig. 5):
4 LEDs illuminated: fully charged
2 LEDs illuminated: 50 % capacity
1 LED flashing: minimum charge, replace the battery.
10
Advertisement
