Traditional Picket Fence - CertainTeed Bufftech Installation Instructions Manual

Traditional Picket Fence

Includes: Danbury (straight and concave)
Rothbury (straight and concave)
locK toP rail in Post
WITH #8 X 3/4" SCREW
dig holes 30"
deeP or to
Frost line
Post holes
4 x 4 POSTS = 10"
4 x 4 POST CENTERS
3" PICkET = 96"
BOTTOM RAIL
PicKets
HOLD BOTTOM RAIL
IN POSITION WITH
bullet cliPs
ALLOW 1" FOR HINGE AND
3/4" For laTCH SYSTEM
ALLOW CLEARANCE
For gaTE SWING
Post suPPorT OPTIONS:
inserT ALUMINUM GAte Post stiFFener
inside Post For FASTER, CLEANER INSTallation
USE (2) PIECES OF 1/2" REBAR IN HINGE,
rebar
seParator cliP
laTCH AND END POSTS. POSITION REBAR
IN OPPOSING CORNERS OF EACH POST WITH
rebar seParator cliPs
1/2" REBAR
7