The Monitor Firmware/Android System Update - Sharp PN-HM851 Software Setup Manual

The monitor firmware/Android system update

To maintain stable operation, apply the latest updates for both the monitor firmware and the
Android system.
 The updates must be downloaded from the Internet.
 The following USB flash drive is required for the work of the monitor firmware update.
File System
USB
Capacity
It does not correspond to an microSD card reader.
Do not use a USB flash drive encrypted or formatted
with multiple partitions.
Use the USB flash drive that nothing is saved. (Do not
save any data other than the update in the USB flash
drive, otherwise the update may not start.)
Do not insert the USB flash drive in the top USB port
compliant with USB 3.0. Otherwise the monitor
firmware will not be updated.
Do not use a USB HUB or a USB extension cable.
Remove any USB device other than the USB flash drive
before the update.
 Update both the monitor firmware and the Android system to the latest version.
The following methods are available to update the monitor firmware/Android system.
① When the monitor is connected to the Internet, update manually
② When the monitor is connected to the Internet, update automatically at a specified time
③ When the monitor is not connected to the Internet, update manually by using your PC
FAT32 (Upper limit of the cluster size: 64KB)
2.0/1.1
At least 3MB free space
3