[Data preparations]
1. Use "SHARP e-Signage S" to distribute images or videos from your PC to the monitor.
For the procedures for using "SHARP e-Signage S", refer to the "SHARP e-Signage S" operation
manual.
2. Before distributing data, insert the media (USB flash drive or microSD memory card) you set in
step 2 of "SHARP e-Signage S Player A1 settings".
3. In the "Settings" screen of "SHARP e-Signage S Player A1", press [RETURN] on the remote
control or select "Go to playback screen" to play the content that is enabled at the current time.
If there is no content to play at the current time, the screen below will appear.
26