② Sharp E-Signage S Player A1 - Sharp PN-HM851 Software Setup Manual

② SHARP e-Signage S Player A1
 To use e-Signage S Player A1, the separately sold "e-Signage S" digital signage software is required.
The latest available version of "e-Signage S" must be installed on the operation PC that
distributes the content.
 For details of e-Signage S Player A1, refer to the "SHARP e-Signage S" operation manual.
[Auto startup application setting]
1. Press [CONTENT MENU] on the remote control to display the "CONTENT MENU" screen.
2. Select [Startup].
3. Select "SHARP e-Signage S Player A1" and press [RETURN] on the remote control.
[MONITOR CONTROL SELECT setting]
MENU
1. Press on the center right side of the remote control to display the OSD menu, and set "SETUP"
– "COMMUNICATION SETTING" – "MONITOR CONTROL SELECT" to "APPLICATION".
MENU
2. Press on the center right side of the remote control to close the OSD menu.
[SHARP e-Signage S Player A1 settings]
1. In the "CONTENT MENU" screen, select "SHARP e-Signage S Player A1".
 The "Settings" screen of "SHARP e-Signage S Player A1" appears.
If the content playback screen appears, press [RETURN] twice on the remote control.
2. Set the save location of the content with "Player setting" – "Save directory".
(Select from "Internal storage", "SD card", or "USB memory".)
3. Set the content distribution method with "Network setting" – "Contents distribution method".
("Only USB/SD memory distribution", "PUSH type reception", "PULL type reception")
 USB flash drive/microSD memory card distribution is also available, even when "PUSH type
reception" or "PULL type reception" is selected.
 To use "PUSH type reception" or "PULL type reception", settings must be configured to match
the distribution method.
4. If you want to turn the monitor ON/OFF at specified times or restart Android OS at a specified
time to maintain stable operation, configure "Power management setting".
25