Android Os ("Application" Input Mode) Off Setting - Sharp PN-HM851 Software Setup Manual

Android OS ("APPLICATION" input mode) OFF setting

If you will not use the Android OS, you can configure the setting below to hide "APPLICATION" in
the input mode selection menu.
 If you use the procedure below, "APPLICATION" will no longer appear in the input mode selection
menu.
 The LAN port and wireless LAN will be disabled and commands (LAN commands) that control
the monitor via LAN cannot be used.
 The USB terminals and microSD card slot will not be used.
1. Press [FUNCTION] on the remote control,
and within 10 seconds, press
side of the remote control.
2. Select "APPLICATION".
3. Set "APPLICATION" to "DISABLE".
 Setting "APPLICATION" to "DISABLE" hides the
Android OS.
4. Select "SET" and press [ENTER] on the remote control.
5. Select "YES" when the restart confirmation screen appears.
If you need to use the Android OS, configure the settings below.
1. Press [FUNCTION] on the remote control, and within 10 seconds, press
side of the remote control.
2. Select "APPLICATION".
3. Set "APPLICATION" to "ENABLE".
4. Select "SET" and press [ENTER] on the remote control.
Select "YES" when the restart confirmation screen appears.
MENU
on the center right
36
MENU
on the center right