② For Wireless Lan - Sharp PN-HM851 Software Setup Manual

② For wireless LAN
1. Attach the wireless LAN antennas to the wireless LAN antenna terminals.
2. Press [CONTENT MENU] on the remote control to display the "CONTENT MENU" screen, and
select "Setup".
3. Select "Wireless Region".
4. Select your region.
The wireless LAN cannot be used while "NO SETTING" is selected
5. Select "Wireless LAN".
The Android "Settings" – "Wireless LAN" screen appears.
6. Set "Wireless LAN" to "ON".
7. Configure settings to connect to wireless LAN.
Setting a static IP address (permanent IP address)
1) Select "Advanced options" to show the optional settings.
2) Change "DTCP" to "Static".
3) Configure settings for the network to which you will connect.
4) Select [Save] to save your settings.
The static IP address cannot be saved unless "IP address", "Gateway", "Netmask", and
"DNS 1" are entered.
The following steps make the wireless LAN profile automatically restore on boot when it
unexpectedly disappears.
8. Press [CONTENT MENU] on the remote control to display the "CONTENT MENU" screen, and
select "Setup".
9. Select "Wireless LAN Profile Backup/Recovery".
10. Select SSID of the wireless LAN profile in step 7 from the menu.
11. Select "OK".
12. When the "Confirm back up" screen appears, select "OK".
13. When the "Enter Password" screen appears, enter the security password for the wireless LAN.
The "Enter Password" screen is not displayed when the security setting is "None".
14. Select the "Show Password" checkbox and ensure that the entered password is correct.
The incorrect password can be set. Please be sure to confirm that the password is
correctly entered.
15. Select "OK".
16. When the "Backup Completed" screen appears, select "OK".
 SSID of the backed-up wireless LAN profile appears in "The Backed Up SSID".
The following steps confirm to restore the wireless LAN profile.
17. Press [CONTENT MENU] on the remote control to display the "CONTENT MENU" screen, and
select "Setup".
18. Select "Wireless LAN".
10