Change This Monitor To Application Mode - Sharp PN-M501 Software Manual

Introduction

Change this monitor to APPLICATION mode

1. Turn on this monitor power.
2. Change the input mode to "APPLICATION" with the input mode selection, or press the CONTENT MENU button.
The base screen of APPLICATION mode (CONTENT MENU screen) appears.
1. Applications
Select the application you want to use.
The application will start.
2. Startup
When APPLICATION mode start up, you can set applications to start automatically.
3. Setup
You can configure settings for APPLICATION mode. (See page 15.)
4. System Setting
You can configure settings for Android.
5. Update
Update applications that is factory-installed in APPLICATION mode. (See page 16.)
(A network environment that allows access to the internet is required.)
4
E
2 3
1
4 5