Front Panel Controls & Switches - Yaesu FTDX101D Operation Manual

Front panel controls & Switches
ON/OFF Switch
Press and hold in this switch for one second to turn
the transceiver on. Similarly, press and hold in this
switch for one second to turn the transceiver off.
USB Jack
Connect a USB A type keyboard or mouse.
KEY
Connect a telegraph key or electronic keyer paddle
to use for CW mode operation.
When connecting a key or other device to
the KEY jack, use only a 3-contact ("ste-
will place a short between the ring and the
constant "key-down" condition.
DOT DASH COMMON
KEY NC GND
4
DOT DASH COMMON
KEY GND
PHONES Jack
jack.
When wearing headphones, we recommend
that you turn the AF Gain levels down to
their lowest settings before turning power
on, to minimize the impact on your hearing
caused by audio "pops" during switch-on.
SIGNAL GND
MIC
This 8-pin jack accepts input from a microphone
uti-lizing a traditional YAESU HF transceiver pinout.
MIC
UP
+5V
DOWN
FAST
MIC GND
PTT
GND