Xtool HD900 User Manual page 3

middle section of the harness when plugging or
pulling out the diagnostic connector. Please plug the
connector vertically to the DLC PORT. Do not plug it
slantly in case terminal damage.
Do not test the car with harness that is not from
3.
XTOOLTECH in case of any loss.
When HD900 is communicating with the car, do not
4.
take out the connector directly. Please cancel the task
AND go back to main menu, and then take out the
connector.
Be gently to avoid vibration or shock when operating
5.
HD900.
When you stop using HD900, please take it out from
6.
the diagnosis port of the car.
Ensure the temperature of operating environment is -
7.
20℃ to 50℃.
Avoid damp and corrosive liquids in storage and daily
8.
use of HD900.
3
HD900