Download Print this page

Toshiba LF810 Product Data Sheet page 8

Stationary ultrasonic flowmeter

Advertisement

Display
Display method
Display content
Display digits
Warnings
Error code
Units
Flow rate units
Totalizing units
LCD (16 character x 2 lines), with backlight
The following items displayed in the upper and lower lines on LCD
can be selected.
• Instantaneous flow rate and units
• Instantaneous flow velocity value and units
• Forward flow totalized value and units
• Backward flow totalized value and units
• Error code
• Status (Out of full scale, No receiving echo warning, Disturbance
detected, Signal Saturation, Check mode and
Low battery)
• Analog input value (*Option)
• ROFF counter value
• DIS. counter value
• Upside gain amplitude
• Downside gain amplitude
• Date & Time
Instantaneous
Max. 7 digits including sign and decimal point
flow rate :
sign section 1 digit, integer section 2 digits
Instantaneous
and decimal fraction 3 digits fixed
flow velocity :
Totalized flow 8 digits including decimal point
Totalized flow :
Symbols are displayed at the right side of the LCD.
• "R": No echo signal received. (upper line of the LCD)
• "D": Disturbance detected. (upper line of the LCD)
• "S": Receiving echo signal saturated. (upper line of the LCD)
• "C": CHECK function is active. (upper line of the LCD)
• "B": Low voltage of coin battery (lower line of the LCD)
• "E": Error occurred by equipment failure. (upper line of the LCD)
• "F.S.": Full Scale (Upper line of the LCD)
(During exceeding the maximum flow rate of measurement range,
indication would be alternated flickering "the maximum value of
measurement range" and "F.S." symbol at the upper & left side of LCD.)
Note:
1) The priority between the above symbols (indicated at the same position) as follows.
E > C > R > D > S
"ERR-01" to "ERR-63" displayed during equipment failure.
• Multiplier
-6
-3
u (x10
), m (x10
), x1, k (x10
• Flow volume units
3
3
L/, m
/, g/, t/, ft
/, bbl/, gal/, acf/
• Flow time units
/s, /min, /h, /D
• Multiplier
-6
-3
u (x10
), m (x10
), x1, k (x10
• Decimal point position
*******
******.*
(x1),
• Units
3
3
L, m
, g, t, ft
, bbl, gal, acf
3
6
), M (x10
)
3
6
), M (x10
)
*****.**
(x0.1),
(x0.01)
7

Advertisement

loading