MSB Technology The Select DAC User Manual page 10

Hide thumbs Also See for The Select DAC:
Table of Contents

Advertisement

Select Dual and Mono Powerbases
The powerbase contains isolation technology. The powerbase detects the input voltage and switches
to 120 volt or 240 volt operation. It is also available in a fixed 100 volt configuration. All powerbases
have over-voltage protection.
Two fuses are provided:
- 5A 250V SLO BLO - 5 mm x 20 mm miniature fuse (This is the main fuse).
- 100mA 250V SLO BLO - 5 mm x 20 mm miniature fuse (This is for the standby supply only).
Powerbase Controls
There is one button on the front of the powerbase as well as two control features just under the
front of the powerbase on the bottom.
Front control White - Power on.
Red - Power off.
Amber - Linked mode, 12 volt trigger controlled.
Flashing Amber - Over-voltage protection.
'Display' wheel This is a rolling wheel to control the brightness of the power indication light
Switch Normal - This sets the powerbase as the 12 volt trigger master.
Linked - This sets the powerbase as the 12 volt trigger slave. The 'master' powerbase
will control this unit.
Select Mono Powerbase Setup/Connections
After plugging in the powerbase, connect both mono powerbases with the supplied 3.5mm mini jack
cable by plugging it into the 12 volt remote trigger connections. Be sure to check that the primary
powerbase 'function switch' is set to the 'NORMAL' position. The secondary powerbase switch set to
'LINKED'. This allows the primary powerbase to control the secondary one without them having to be
turned on/off seperatley.
Technical Specifications
AC Voltage 120/240V (Auto switching)
Power Consumption 100 Watts with fully configured Select DAC
Chassis Dimensions Width: 17.5 in (444 mm)
Shipping Dimensions Width: 25 in (635 mm)
Included Accessories 2X Power Cables
Optional 100V fixed configuration
Less than 2W standby
Depth: 17.5 in (444 mm)
Height without feet: 3 in (79 mm)
Stack height: 3.625 in (92 mm)
Weight: 45.8 lbs (20 kg)
Depth: 25 in (625 mm)
Height: 10 in (254 mm)
Weight: 65 lbs (29 kg)
Ground Cable
IEC Power Cord
4X Spiked Feet

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

The reference dac

Table of Contents