MSB Technology The Select DAC User Manual page 5

About the 4 input module slots
The DAC has four input module slots. They are labeled A through D. There are two classes of input
modules, analog and digital. Analog modules must be placed adjacent to the analog output module.
They can be either be additional analog inputs or a second analog output module. Digital modules can
be placed in any position. Each module is completely self contained. It is recognized by the DAC and
identified on the display. When the module is not in use it is disabled.
Available Digital Input Modules
XLR S/PDIF A single XLR digital input with a word sync output.
Optical/Coaxial S/PDIF A Toslink and Coaxial digital input with a word sync output.
MQA USB A single USB interface for playback via a computer based device. This
Renderer A renderer interface for use on a home network or server. (See
Available Preamps
The DAC is available with one of two output modules.
Balanced Preamp Offers one set of balanced analog inputs and outputs. Provides
Single-Ended Preamp Offers one set of single-ended analog inputs and outputs. Provides
Additional Analog Inputs and Outputs
In addition to the primary output module, additional analog inputs and a secondary analog output
can be added.
Isolated Analog Output Provides a second analog output as single-ended or balanced.
Isolated Sub Analog Output Provides an isolated sub-woofer output as single-ended or balanced.
Additional Analog Input Provides an extra analog input connection as single ended or balanced.
S MSB's proprietary interface for use with MSB transports. This module
2
ProI
provides two inputs.
module provides support for MQA decoding. (See USB manual for
operation and setup details)
Renderer manual for operation and setup details)
Pro ISL MSB proprietary interface for use with MSB transports. This module
provides one input.
volume control with our passive constant impedance volume control
technology.
volume control with our passive constant impedance volume control
technology.
Only one analog output module can be added per DAC.
Only one can be added per DAC.
Multiple inputs can be installed.