Janome Quilt Maker Pro 16 User Manual page 8

User Manual
To increase the life of your machine
1. Do not store this machine in areas exposed to direct sunlight or high humidity. Never use or store
the machine near a heater, an iron, a halogen lamp or other hot things.
2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring powders
can damage the case and the machine and therefore should never be used.
3. Do not drop or bump the machine.
4. Always consult the manual to replace or fi x the hopping foot, needle or any other part of the
machine. If necessary contact an authorized Janome representati ve or Janome technical support.
Opti onal U.S. Grounding
GROUNDING PIN
(A)
This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks like the plug illustrated
in sketch A above. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this
plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should
be used only unti l a properly grounded outlet can be installed by a qualifi ed electrician. The green colored rigid ear, lug, and
the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by the metal screw.
 IMPORTANT: In Canada, the use of a temporary adapter is not permitt ed by the
Canadian Electric Code.
To repair or adjust the machine
If the machine breaks down or needs adjustment, fi rst check the troubleshooti ng chart in the appendix to
inspect and adjust the machine yourself.
For more product informati on and updates, visit our website at www.janome.com.
The contents of this manual and product specifi cati ons are subject to change without prior noti ce.
8
QUILT MAKER PRO 16
for Customers with 120 VAC Connecti ons
GROUNDED OUTLET BOXES
TAB FOR
GROUNDING
SCREW
ADAPTER
(B)
METAL
SCREW
(C)
www.janome.com