Preparing For Installation - Piazzetta P963 THERMO Instructions For Installation, Use And Maintenance Manual

4.0 PREPARING FOR INSTALLATION

To prevent accidents or damage to the product we recommend the
following:
- unpacking and installation must be carried out by at least two people;
- every operation involving movement of the product must be carried
out with the proper tools in full compliance with current safety
regulations;
- the packaged product must be kept in the position according to the
directions shown by the diagrams and notices on the pack;
- if ropes, straps or chains are used, ensure that they are able to take
the weight of the pack and that they are in good condition;
- use slow continuous movements when moving the pack to avoid
jerking the ropes, chains, etc.;
- do not tilt the package excessively to avoid toppling;
- never stand in the vicinity of loading/unloading equipment (forklift
trucks, cranes etc).
Before proceeding with installation, remove the fastening screws (A).
(Fig. 32)
Having placed the appliance in its final location, using the Allen wrench
provided in the kit, remove the screw securing the SMOKE BAFFLE
PLATE (Fig. 33).
This fastening screw must be removed before the appliance is lit for
the first time.
a
Unpack the product being careful not to damage or scratch
it, take the accessories pack and any pieces of polystyrene
or cardboard used to wedge moveable parts etc. out of the
stove firebox.
Keep packaging (plastic bags, polystyrene, etc.) out of reach
of children, since it could be a potential source of danger, and
dispose of according to local regulations.
Fig. 32
A
Fig. 33
H07027850 / DT2000931 – 01
FASTENING
SCREW
ALLEN
WRENCH
DT2012244-06
DT2033294-00
SMOKE
BAFFLE PLATE
DT2032992-00
19