Return Shipments To Keysight Technologies - Keysight N7744A Getting Started Manual

1
Getting Started

Return Shipments to Keysight Technologies

12
If the instrument is to be shipped to an Keysight Technologies
Sales/Service Office, attach a tag showing owner, return address,
model number and full serial number and the type of service required.
The original shipping carton and packing material may be reusable, but
the Keysight Technologies Sales/Service Office will provide
information and recommendations on materials to be used if the
original packing is no longer available or reusable. General instructions
for repackaging are as follows:
•
Wrap instrument in heavy paper or plastic.
•
Use strong shipping container. A double wall carton made of 350-
pound test material is adequate.
•
Use enough shock absorbing material (3 to 4 inch layer) around all
sides of the instrument to provide a firm cushion and prevent
movement inside container. Protect control panel with cardboard.
•
Seal shipping container securely.
•
Mark shipping container FRAGILE to encourage careful handling.
•
In any correspondence, refer to instrument by model number and
serial number.
Deleting user data
If you need to delete all your logged data and user configurations, that
is to reset the instrument completely:
1 Press and hold the Reset/standby button until the instrument starts
to reboot.
2 When the instrument reboots, press the Reset/standby button once
more briefly, to confirm you want to delete all the stored data.
Keysight N77xx Series