Safety Considerations; Safety Considerations - Overview; Safety Symbols - Keysight N7744A Getting Started Manual

Safety Considerations

Safety Considerations - Overview

Safety Symbols

C A U T I O N
W A R N I N G
Keysight N77xx Series
The following generalsafety precautions must be observed during all
phases of operation, service, and repair of this instrument. Failure to
comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and
intended use of the instrument. Keysight Technologies Inc. assumes no
liability for the customer's failure to comply with these requirements.
This product has been designed and tested in accordance with IEC
Publication 61010-1, Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory, and has been supplied in a safe
condition. The instruction documentation contains information and
warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
The caution sign denotes a hazard. It calls attention to a procedure which, if not
correctly performed or adhered to, could result in damage to or destruction of the
product. Do not proceed beyond a caution sign until the indicated conditions are
fully understood and met.
The warning sign denotes a hazard. It calls attention to a procedure which, if not
correctly performed or adhered to, could result in injury or loss of life. Do not
proceed beyond a warning sign until the indicated conditions are fully understood
and met.
Getting Started
The apparatus will be marked with this
symbol when it is necessary for the user
to refer to the instruction manual in order
to protect the apparatus against damage.
1
13