Installation, Operation and Maintenance Manual
DOC.IOM.EF.EN Rev. 6
8.3
Removing of Limit Stop
1.
Figure 20
8.4
Removing Pistons
1.
2.
Figure 21
Disassembly
Remove the limit stop screws (17), limit stop nuts (18), limit stop washers (19) and
limit stop o-rings (15). Discard the o-rings.
Limit Stop Removal
15
Use a wrench and turn the pinion counterclockwise (180°) until the pistons (3)
comes out of the body.
Remove the piston bearings (7), piston rack bearing strips (6) and piston o-ring
seals (13). Discard these parts.
Piston Removal
6
7
3
13
19
18
17
Section 8: Disassembly
September 2015
13
3
7
6
27