Environment And Enclosure - Allen-Bradley E Series Installation Instructions Manual

ControlLogix ControlNet Interface Module 5

Environment and Enclosure

This equipment is intended for use in a Pollution Degree 2 industrial
ATTENTION
environment, in overvoltage Category II applications (as defined in IEC
publication 60664-1), at altitudes up to 2000 meters without derating.
This equipment is considered Group 1, Class A industrial equipment
according to IEC/CISPR Publication 11. Without appropriate
precautions, there may be potential difficulties ensuring
electromagnetic compatibility in other environments due to
conducted as well as radiated disturbance.
This equipment is supplied as open-type equipment. It must be
mounted within an enclosure that is suitably designed for those
specific environmental conditions that will be present and
appropriately designed to prevent personal injury resulting from
accessibility to live parts. The interior of the enclosure must be
accessible only by the use of a tool. Subsequent sections of this
publication may contain additional information regarding specific
enclosure type ratings that are required to comply with certain
product safety certifications.
NOTE: See NEMA Standards publication 250 and IEC publication
60529, as applicable, for explanations of the degrees of protection
provided by different types of enclosure. Also, see the appropriate
sections in this publication, as well as Industrial Automation Wiring
and Grounding Guidelines, Allen-Bradley publication 1770-4.1, for
additional installation requirements pertaining to this equipment.
Publication
1756-IN604A-EN-P - February 2006