Allen-Bradley E Series Installation Instructions Manual page 12

12 ControlLogix ControlNet Interface Module
Prepare the Chassis for Module Installation
Before you install the module, you must install and connect a ControlLogix
chassis and power supply. A 4-slot chassis with a power supply is shown in the
figure Chassis and Power Supply.
Chassis and Power Supply
Power
Supply
For information on installing these products, refer to the table Chassis
Installation Publications.
Chassis Installation Publications
Chassis Type Chassis Installation
Series B Publication
1756-A4 1756-IN080
1756-A7
1756-A10
1756-A13
Publication
1756-IN604A-EN-P - February 2006
Power Supply Power Supply
Installation
1756-PA72/B Publication 1756-5.67
1756-PB72/B
1756-PA75/A Publication 1756-5.78
1756-PB75/A
Chassis