22 ControlLogix ControlNet Interface Module
Connect a Programming Terminal to the Network with a 1786-CP
Cable
To connect a programming terminal to the network using a 1786-CP cable,
you have the following options:
• Use a 1784-KTC, 1784-KTCx, or 1784-PCC communication card and
a 1786-CP cable:
IMPORTANT
• Use a 1770-KFC communication interface, a serial or parallel
connection, and a 1786-CP cable:
Publication
1756-IN604A-EN-P - February 2006
1784-KTC, KTCx,
1756-CNBR
PCIC, or PCC Card
1786-CP Cable
ControlNet Link
To work properly, the primary and redundant partner
module must be connected to the same network
segment. If you are using redundant media, connect the
channel of each partner to the same network segment.
1756-CNBR
1786-CP
Cable
ControlNet Link
1770-KFC
Serial or Parallel
Connections