Three-Party Calls; Enquiry; Toggling - Aastra 6739i User Manual

Sip telephone at the opencom 1000 communications system
Hide thumbs Also See for 6739i:
Table of Contents

Advertisement

Using the Aastra 6739i

Three-Party Calls

You are making a call, e.g. on the trunk key 1
is lit. You can now forward the call, execute an enquiry, switch back and forth
between two subscribers ("toggle") or set up a conference. You can use any
available trunk key

Enquiry

While telephoning, you can make an enquiry to another subscriber.
Note
The enquiry function cannot be used to transfer calls on SIP telephones.
Alternatively, use the
1. Press an unassigned trunk key, e.g. trunk key 2
Hold softkey and then press an available trunk key.
You hear the internal dialling tone. The person calling is put on hold and now
hears music on hold.
2. Now dial the call number of the subscriber desired and make the enquiry call.
3. Press the goodbye key
4. Press the trunk key where the first caller is waiting or press the
Hold softkey. You are now connected with the caller on hold once again.
Note
If after ending the enquiry call you put down the handset, after a few seconds
you will automatically be called back with the connection on hold.

Toggling

While you are conducting an enquiry call, the first caller is put on hold (see
page 9). Now you can toggle between callers (switch back and forth).
1. Press the trunk key (e.g.
put on hold. The LED indicator of the trunk key of the respectively held caller
blinks during this process. The held caller hears music on hold.
2. Press the trunk key of the caller waiting to switch to that caller. The other caller
is now put on hold.
/
/
for three-party conference calls.
Transfer softkey or the transfer key
to terminate the enquiry call.
) of the caller waiting currently. The other caller is
, its corresponding LED indicator
.
. Alternatively press the
9

Advertisement

Table of Contents
loading

Table of Contents