Temperature Measurements; Frequency (Duty Cycle) Measurements (Electronic) - PCE Instruments PCE-ITM 20 User Manual

3.10

Temperature Measurements

• Set the function switch to the green Temp position.
• Insert the Temperature Probe into the input jacks, making
sure to observe the correct polarity.
• Press the MODE button to indicate "ºF" or "ºC".
• Touch the Temperature Probe head to the part whose
temperature you wish to measure. Keeps the probe touching
the part under test until the reading stabilizes (about 30
seconds).
• Read the temperature in the display.
Note:
The temperature probe is fitted with a K-type mini connector. A
mini connector to banana connector adaptor is supplied for
connection to the input banana jacks.
3.11

Frequency (Duty Cycle) Measurements (electronic)

• Set the rotary function switch to the green H z/%
position.
• Insert the black lead banana plug into the negative COM
jack and the red test lead banana p lug into the positive
Hz jack.
• Touch the test probe tips to the circuit under test.
• Read the frequency on the display.
• Press the MODE button to indicate "%".
• Read the % duty cycle in the display.
© PCE Instruments
13