Table of Contents
Advertisement
8. RTD Temperature
MEASURING PROCEDURE
1) Power On the meter by short pressing the " Power
button " ( 3-2, Fig. 1 ) >1.5 seconds, the LCD will light.
2) Press the " Function button " ( 3-6, Fig. 1 ) (short push) , in
sequence until to the " P t " function be
selected.
3) TP-1000 probes are connected to the Pt 1000 Ω probe terminal
" ( 3-11, Fig. 1 ).
The display will show TP-1000 probe sensing temperature value.
4)
9. Infrared Thermometer
MEASURING PROCEDURE
NON-CONTACT TEMPERATURE MEASUREMENTS
1) Power On the meter by short pressing the "power
button " ( 3-2, Fig. 1 ) >1.5 seconds, the LCD will light.
2) Use the " Function button " ( 3-6, Fig. 1 )(short push), to select function ,
until to the " I r " function be selected.
3) Press and hold the IR thermometer test button " Power button " ( 3-2, Fig. 1 ).
Use the led light pointer to identify the exact spot to be measured.
4)
The area of the surface to be measured must be larger than the spot
5)
size as determined by the distance to spot size specification.
when test value stable then reless the IR thermometer test button
6)
" Power button " ( 3-2, Fig. 1 ) .
The display will show and hold the IR sensing temperture value.
7)
11
Advertisement
Table of Contents
