Introduction; Supported Phones - Yealink VP59 Auto Provisioning Manual

Introduction

Yealink IP phones are full-featured telephones that can be plugged directly into an IP network
and can be used easily without manual configuration.
This guide provides instructions on how to provision Yealink IP phones with the minimum
settings required. Yealink IP phones support FTP, TFTP, HTTP, and HTTPS protocols for auto
provisioning and are configured by default to use the TFTP protocol.

Supported Phones

The purpose of this guide is to serve as a basic guidance for provisioning Yealink IP phones.
The following table lists product names and available firmware versions for IP phones that use
auto provisioning process outlined in this guide.
Product Name
VP59
SIP-T58A
SIP-T54W
SIP-T54S
SIP-T53W/T53
SIP-T52S
SIP-T48G/S
SIP-T46G/S
SIP-T42G/S
SIP-T41P/S
SIP-T40P/G
SIP-T29G
SIP-T27G
SIP-T23P/G
SIP-T21(P) E2
SIP-T19(P) E2
Boot File
(Available Firmware
Version)
Yes (83 or later)
Yes (80 or later)
Yes (84 or later)
Yes (81 or later)
Yes (84 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Yes (81 or later)
Introduction
Exclude Mode
(Available Firmware
Version)
Yes (83 or later)
Yes (83 or later)
Yes (84 or later)
Yes (83 or later)
Yes (84 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
Yes (83 or later)
1