Graco GrindLazer 25M992 Operation Manual page 15

5. Non-DCS Models: Rotate Drum Adjustment Dial
counterclockwise until a hard stop is felt.
DCS Models: Press the Home Button on DCS Con-
trol.
6. 25M994 Model Only: Make sure Power Switch (B)
is in UP position.
3A5918B
ti15088a
7. Start Engine:
a. Move fuel valve to open.
ti5248a
25M992, 25M993 & 25N658 Models
b. Move choke to closed.
ti5249a
25M992, 25M993 & 25N658 Models
c. Set Engine Power Switch (B) to ON.
25M992 & 25M993 Models
d. Pull starter cord, or turn key (electric start
models only) to start engine.
e. After engine starts, move choke to open.
25M992, 25M993 & 25N658 Models
Operation
25M994 & 25N659 Models
ti3315a
25M994 & 25N659 Models
15