Table of Contents
Advertisement
Cut Depth Button
Quick Press: Takes the drum to the Cut Depth Target.
Long Press:
-
If at or above zero point: Opens new screen to
select desired cut depth using up/down buttons.
•To exit without saving, quick press the Cut
Depth Button.
•To exit with saving, long press the Cut Depth
Button.
-
If below zero point: Reprograms the Cut Depth
Target to the current drum position.
3A5918B
Up Arrow Button*
Quick Press: Raises the drum by 0.01" (0.25mm, 10
mil).
Long Press: Raises the drum to Home position.
Down Arrow Button*
Quick Press: Lowers the drum by 0.01" (25mm, 10
mil).
Long Press: Lowers the drum to Cut Depth Target.
*Handlebar Rocker Switch has the same functions as
Up and Down Arrow Buttons.
Setup
11
Advertisement
Table of Contents
