Dcs Control (Dcs Models Only) - Graco GrindLazer 25M992 Operation Manual

For removal of materials from flat horizontal concrete and asphalt surfaces

Hide thumbs Also See for GrindLazer 25M992:

Table of Contents

Setup

DCS Control (DCS Models only)

Buttons on the DCS Control have two functions, quick

press and long press. Quick press refers to pressing the

button and releasing the button quickly, while long press

is pressing the button and holding the button for two or

more seconds.

NOTE: "+" (plus) refers to above pavement surface. "-"

(minus) refers to below pavement surface.

Run Screen

Home Button

Quick Press: Takes the drum to its highest position.

Long Press: Brings up Menu Screen.

Zero Button

Quick Press: Takes the drum to the surface.

Long Press: Reprograms the zero point to the current

drum position.

3A5918B

Table of Contents