Download Print this page

Raymarine ST290 Quick Reference Manual

Graphic display
Hide thumbs Also See for ST290:

Advertisement

Quick Links

ST290 Graphic Display - quick reference guide
Alarm pages enable you to set alarm modes & thresholds
You can use alarm pages to:
Set the operating mode of each Alarm, either OFF, ON or for operation with
an Auxilliary (external) alarm unit.
Set the threshold of each Alarm, to define when the Alarm will operate.
Note: Where examples are required, this guide uses the High Apparent Wind Angle Alarm. The principles are valid for all Alarms.
1. Enter the ALARMS chapter
2. Select the Alarm page you want
SPEED
LOW
alarm
SPEED
LOW
alarm
TWS
HIGH
alarm
TWS
LOW
alarm
TWA
LOW
alarm
ST290 Graphic Display Alarm pages
How to see Alarm pages
HI SEA
LO SEA
TEMP
TEMP
alarm
alarm
All Alarm pages display
Anchor Alarm pages display
Note: This illustration shows the Alarm pages available in an
ST290 Full Profile. If a different profile is selected, some Alarm
pages may not be available.
TWA
HIGH
alarm
SHALLOW
alarm
1 s
AWS
AWS
LOW
HIGH
alarm
alarm
SHALL.
DEEP
ANCHOR
alarm
alarm
DEEP
ANCHOR
alarm
OFF
COURSE
alarm
AWA
HIGH
alarm
AWA
LOW
alarm
D6298-1

Advertisement

loading

Summary of Contents for Raymarine ST290

  • Page 1 All Alarm pages display Anchor Alarm pages display COURSE HIGH alarm alarm Note: This illustration shows the Alarm pages available in an ST290 Full Profile. If a different profile is selected, some Alarm pages may not be available. HIGH alarm alarm HIGH HIGH...
  • Page 2 Repeat steps 2 to 5 for each Alarm you to leave setup mode and want to set up. save the alarm value you have set. D6299-1 Document number: 86084-1 Use with: ST290 Instrument System Owner’s Handbook Date: 15 May 2003...