Page Edit; Adding A New Page - Raymarine ST290 Owner's Handbook Manual

81183_2 S7.book Page 10 Wednesday, May 7, 2003 1:52 PM
7-2-10
4. Use the
characters until the character you want is present at the flashing cur-
sor.
5. Press the
sor to the next character position.
6. Repeat steps 4 and 5 until the chapter has the required name.
7. Hold down the
leave the chapter name edit mode.
Deleting a chapter
If you delete a chapter, the chapter title and all pages in the chapter are
removed from the custom profile you are editing. However, they are still
available on the system and can be reinstated if required, by carrying out
the Creating a new chapter and Adding a new page procedures.
To delete a chapter:
1. Use the
2. Use the
3. Hold down the
deleted from the Custom profile.

Page edit

Adding a new page

To add pages:
1. With the chapter edit screen displayed, use the
the name of the chapter to which you want to add a page.
2. Press the
Note: As chapters must contain at least one page, a SPEED page is auto-
matically added to each new chapter. You can change this as necessary.
or button to cycle through the available alphanumeric
button to accept this character and move the flashing cur-
button for 1 second, to save the chapter name and
button to highlight the chapter you want to delete.
button to highlight DELETE on the edit menu.
or
button for 1 second. The selected chapter is then
button to display the page edit screen.
ST290 Instrument System Owner's Handbook
Section 7: System Setup
button to highlight