Setting Trip Counters; Setting Race Timers - Raymarine ST290 Owner's Handbook Manual

81183_2 S7.book Page 14 Wednesday, May 7, 2003 1:52 PM
7-2-14
To set up each option:
1. With the general options page displayed (Figure 2-14 ), use the
button to highlight the option you want to set.
2. Hold down the
selected option then flashes.
3. Use the
4. Hold down the

Setting trip counters

Figure 2-15: Trip counters setup
To set up the trip counters:
1. With the trip counters page displayed (Figure 2-15 ), use the
button to highlight the required counter.
2. Hold down the
3. Use the
required.
4. Hold down the
5. Repeat steps 1 to 4 for each counter.

Setting race timers

You can set each race gun timer to any whole-minute value between 1 and
15 minutes.
To set the race timer:
1. With the race timers page displayed s (Figure 2-16 ), use the
button to highlight the required timer (GUN 1, GUN 2 or GUN 3).
button for 1 second to enter edit mode. The
or button to set the selected option to the value you want.
button for 1 second to save the value.
D5946-1
button for 1 second to enter edit mode.
or button to set the counter either
button for 1 second to save your setting.
ST290 Instrument System Owner's Handbook
Section 7: System Setup
or
or
(on) or (off) as
or