Subscribe to Our Youtube Channel
Related Manuals for SCHUNK LPE 100
Summary of Contents for SCHUNK LPE 100
- Page 1 Translation of the original manual Linear gantry electric LPE 100 LPE 200 Assembly- and Operating manual 01.03/LPE/en...
- Page 2 Imprint: Copyright: This manual remains the copyrighted property of SCHUNK GmbH & Co. KG. It is solely supplied to our customers and operators of our products and forms part of the unit. This documentation may not be duplicated or made accessible to third parties, in particular competitive companies, without our prior permission.
-
Page 3: Table Of Contents
Table of contents Table of contents About this manual ....................5 Purpose/validity ..................5 Target groups ..................... 5 Applicable documents ................5 Symbols in this manual ................6 Copyright ....................6 Technical changes ..................6 Basic safety notes ....................7 Intended use .................... - Page 4 Appendix (on CD-ROM) Assembly of handling modules ..............18 Maintenance and repair ..................19 Troubleshooting....................20 Component documentation ................20 Translation of original declaration of incorporation ........21 Appendix (on CD-ROM) Documentation Linear axis Beta ..............Appendix 1 Documentation Pillar assembly system .............Appendix 2 Documentation Dirve MSK ................Appendix 3 01.03/LPE/en...
-
Page 5: About This Manual
About this manual About this manual Purpose/validity This manual is part of the module and describes the safe and proper assembling. This manual is valid only for the module specified on the front page. Target groups Target group Task Keep this manual available for the personnel at all times. Manufacturer, operator ... -
Page 6: Symbols In This Manual
Handling instruction, also measures in a warning or note. Tab. 3 Copyright This manual remains the copyrighted property of SCHUNK GmbH & Co. KG. It is solely supplied to our customers and op- erators of our products and forms part of the unit. -
Page 7: Basic Safety Notes
Basic safety notes Basic safety notes Intended use The unit is to be used only for the application contractually agreed between the manufacturer/supplier and user. The unit is intended for installation in a machine/system. The re- quirements of the applicable guidelines must be observed and complied with. -
Page 8: Controlled Production
2.2.2 Constructional changes, attachments, or modifications Modifications, additions and conversions which could impair safety may not be made to the unit without SCHUNK's permission. Non-authorized modifications results in the exclusion from prod- uct liability. 01.03/LPE/en... -
Page 9: Spare Parts
Basic safety notes 2.2.3 Spare parts Spare parts must meet the requirements of the manufacturer and/or the supplier. This can always be guaranteed with original spare parts. Improper repair as well as use of non-original spare parts results in the exclusion from product liability. Obligations of the manufacturer/operator 2.3.1 Choice of personnel and personnel qualifications... -
Page 10: Organizational Measures
Basic safety notes Only employ trained personnel who have been shown how to perform the work activities. If necessary, make use of the manufacturer’s training programmes. Personnel requiring training and instruction or those who are already receiving training and instruction must be supervised on the unit by skilled personnel. -
Page 11: Personnel Responsibilities
Basic safety notes Personnel responsibilities 2.4.1 Safety-conscious working Avoid any manner of working that may interfere with the function and operational safety of the unit. Observe the safety and accident-prevention regulations valid at the usage site. Observe the environmental protection regulations valid at the usage site. -
Page 12: Notes On Particular Risks
Basic safety notes Notes on particular risks Risk of injury when the machine/system moves unexpectedly! Remove the energy supplies before installation, modification, maintenance, or adjustment work. Make sure that there is no more residual energy in the system. ... -
Page 13: Warranty
Reference value Value ≤ 70 noise level [dB(A)] ambient temperature [C] 0° to +80° permissible payload [kg] Linear gantry electric LPE 100 Linear gantry electric LPE 200 dynamic values horizontal Max. acceleration a [m/s²] Max. speed v [m/s] vertical max. acceleration a [m/s²] max. -
Page 14: Configuration
Configuration Configuration The unit consists of following components: Fig. 1 01.03/LPE/en... - Page 15 Configuration Item Designation Documentation „Assembly system“, Appendix 2 Pillar Assembly system LPE 100: Linear axis Beta 60-SSS with spindel drive - feed / rotation = 5 mm Documentation „Linear axis Beta“, Appendix 1 LPE 200: Linear axis Beta 80-SSS with spindel drive - feed / rotation= 5 mm Documentation „Sensors“, Appendix 4...
-
Page 16: Assembly And Initial Operation
Assembly and initial operation Assembly and initial operation Mechanical connection WARNING Risk of injury when the machine/system moves unexpectedly! Switch off power supply. Make sure that there is no more residual energy in the system WARNING Risk of injury from falling of the unit during assembly! ... -
Page 17: Connection Of The Motors
Assembly and initial operation Connection of the motors GEFAHR Danger of electrical potential! Switch off power supply before assembly, adjustment and maintenance, and secure against restart. The electrical installation may be performed only by a trained electrician. Cover live parts. ... -
Page 18: Assembly Of Handling Modules
Assembly and initial operation Assembly of handling modules WARNING Risk of injury when the machine/system moves unexpectedly! Switch off power supply. Make sure that there is no more residual energy in the system. Notes • Do not contribute any excessive forces and torques during assembly of loads. -
Page 19: Maintenance And Repair
Maintenance and repair Maintenance and repair WARNING Risk of injury when the machine/system moves unexpectedly! Due to movement of the axis! Remove the energy supplies before maintenance. Make sure that there is no more residual energy in the system. -
Page 20: Troubleshooting
The component documentation contains troubleshooting informa- tion. Component documentation The scope of delivery includes the documentation for the follow- ing components (see CD-ROM, Appendix 1-3): Components Manufacturer Appendix Linear axis Beta SCHUNK Pillar assembly system SCHUNK Drive MSK SCHUNK Tab. 7 01.03/LPE/en... -
Page 21: Translation Of Original Declaration Of Incorporation
Translation of original declaration of incorporation Translation of original declaration of incorporation In terms of the EC Machinery Directive 2006/42/EC, annex II B Manufacturer/ SCHUNK GmbH & Co. KG. distributor Spann- und Greiftechnik Bahnhofstr. 106 – 134 D-74348 Lauffen/Neckar We hereby declare that the following product:... - Page 22 Translation of original declaration of incorporation 01.03/LPE/en...
- Page 23 01.03/LPE/en...
- Page 24 01.03/LPE/en...
Need help?
Do you have a question about the LPE 100 and is the answer not in the manual?
Questions and answers