Weekly program (cont.)
Adjusting "EU type" daily programs – Start time / Stop time
Start time
1. Press the [C/F – Prog] button. The programmed weekday(s), "Prog 1" indicating the
first program event of the day and the word "Start" will appear on display.
The HOURS will flash.
Note: If this is the first time a program is being set, the symbols "--" will flash.
2. Use the [+] and [-] buttons to adjust the start time hours of the first event.
3. Press the [C/F – Prog] button again. The MINUTES will flash.
4. Use the [+] and [-] buttons to adjust the start time minutes of the first event.
Stop time
5. Press the [C/F – Prog] button again. T the word "Stop" will appear on display,
and the HOURS will flash.
6. Use the [+] and [-] buttons to adjust the stop time hours of the first event
7. Press the [C/F – Prog] button again. The MINUTES will flash
8. Use the [+] and [-] buttons to adjust the stop time minutes of the first event
Follow the steps above for the other schedule events of the same day
(Prog 2 for two events per day, or Prog 2, 3, and 4 for four events per day).
Follow the steps above for all the other days.
- 15 -